CRA106BU115 Frigidaire Air Conditioner - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Needed to replace front panel on Electrolux A/C - New Part Doesn't Fit
Purchased part number 5304476793. Part was not the right size, so called Electrolux (877-435-3287). After 50 minutes on hold, I was told this IS the correct part.
When I explained that it is 1/2" too tall, and 1 1/2" too narrow, and none of the slots line up, she would only say (again) that it was the correct part, and their drawing was correct.
And left me hanging. No discussion, no mention that maybe the wrong part was in the packing. No options. Thank you for calling. Goodbye.
At least PartsSelect was prompt and courteous, and gave me a refund, since the manufacturer was not at all interested in the issue.
When I explained that it is 1/2" too tall, and 1 1/2" too narrow, and none of the slots line up, she would only say (again) that it was the correct part, and their drawing was correct.
And left me hanging. No discussion, no mention that maybe the wrong part was in the packing. No options. Thank you for calling. Goodbye.
At least PartsSelect was prompt and courteous, and gave me a refund, since the manufacturer was not at all interested in the issue.
Parts Used:
-
Denis from VERMILION, OH
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan Blade Broken
I took all of the outer screws out and removed sheet metal cover. I had to unbolt fan motor from bottom of the unit. I moved the fan motor so I could remove the Fan Blade. Put new blade on and reversed the process. Works Fine.
Parts Used:
-
Randy from Sumas, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!