Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CP320S-C

CP320S-C Jenn-Air Smoker - Overview

Get Parts and Repair Help for CP320S-C

If you know the smoker repair part you need, you can browse the list of all parts on the CP320S-C, or you can search by name or part description. You can also find your part by where it is located on the CP320S-C by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your smoker. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CP320S-C

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$65.83

Grill Element

$4.63

Fan Switch Grommet

This grommet is located under the fan switch.

$53.62

Air Inlet Grill

This part is located over top of the blower in the center of the stove top.

$29.61

Light Box

$83.63

Single Grill Cover - Black

$100.79

Single Grill Grate

$5.39

Shunt Clip

$4.58

Speed Nut

Grill Grate Cover

USE WPL 4005F525-51

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner had one temperature--hot, regardless of setting

  • Customer: James H from Oxford, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 71 of 78 people found this instruction helpful
1. Killed power and removed the regulator's knob, noted the position of the old control.
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the h... read more

Burner Control not Functioning

  • Customer: Randall from Mohnton, PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 22 of 25 people found this instruction helpful
Simple Repair!
Turn off Power
Remove four screws under panel.
Remove old burner knob.
Drop Burner Panel from range
Remove 5 wire connectors from old burner control
with pliers
Remove 2 screws that held burner control to range
panel
Install new burner control
Rplace two screws to burner control
Replac... read more

We had no control of tempurature on one of the four burners on the electric range cook top

  • Customer: Robert from Marietta, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 9 of 11 people found this instruction helpful
First step is turn the power to the range off. Then I removed the grate covering the down draft vent in the center of the cook top. Inside the vent opening are two screws that secure a panel that holds the four knobs that control temperature settings. Remove these screws. Slide the panel tward the back of the range while lifting it up. This will allow remov... read more