Models > CMV1100AAQ

CMV1100AAQ Maytag Microwave - Overview

Get Parts and Repair Help for CMV1100AAQ

If you know the microwave repair part you need, you can browse the list of all parts on the CMV1100AAQ, or you can search by name or part description. You can also find your part by where it is located on the CMV1100AAQ by selecting a section below. We’ve also included any installation videos we have for CMV1100AAQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.


Light Bulb - 40W 120V

Sold individually.


Bulb - 120v 25w




Turntable Drive Motor

This motor rotates the glass turntable in the microwave.






Grease and Air Filter


Carbon Air Filter



Glass Cooking Tray

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Turntable on Maytag MMV5100AAW Stopped Turning

  • Customer: Tim from Oviedo FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 35 of 36 people found this instruction helpful
Symptom: Turntable stopped turning. Was able to remove the glass tray in the microwave and the little cam that drives the glass tray was barely turning. Control on microwave to turn the turntable on/off was working as evidenced by the cam not turning when I turned off the turntable. When I turned the cam manually, I could feel the motor turn so I knew the... read more

turntable motor was bad.

  • Customer: CHARLES from HOLCOMBE WI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
fliped it upside down and took of the panel un screwd the motor and un hooked the wire leads.then revesed the process. read more

Turntable quit working

  • Customer: Richard from Spokane WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
Removed the 4 screws holding the base of the microwave, it was mounted over the stove. Unpluged the wires from the motor, removed 2 screws holding to motor to the underside of the stove. Removed the motor and replaced it with the new motor, replaced the 2 screws, replaced the bottom cover, and started the oven. The turntable worked / revolved once again. ... read more