Models > CMT102SGW0

CMT102SGW0 Whirlpool Microwave - Overview

Get Parts and Repair Help for CMT102SGW0

If you know the microwave repair part you need, you can browse the list of all parts on the CMT102SGW0, or you can search by name or part description. You can also find your part by where it is located on the CMT102SGW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$19.51

DIODE

This part allows power to go one way but not the other.

Order within the next 9 hrs and your part ships today!
$133.68

Magnetron

This part is used to generate microwave energy/heat.

Order within the next 9 hrs and your part ships today!
$5.81

SPACER

Waterproof seal.

Order within the next 9 hrs and your part ships today!
$48.38

Crisping Plate

Order within the next 9 hrs and your part ships today!
$5.81

Plate Cam

Sold individually.

Order within the next 9 hrs and your part ships today!
$25.54

Door Switch - Primary and Secondary

This part keeps the microwave from running when the door is open.

Order within the next 9 hrs and your part ships today!
$13.72

Pan Handle

Order within the next 9 hrs and your part ships today!
$7.96

Interlock

This part houses the switches.

Order within the next 9 hrs and your part ships today!
$25.54

SWITCH

This part keeps the microwave from running when the door is open.

Order within the next 9 hrs and your part ships today!
$21.21

Door Latch

This latch is sold individually. Two might be required for your model.

Order within the next 9 hrs and your part ships today!

Common Symptoms of the CMT102SGW0 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven buzzed and no heat

  • Customer: Joseph from Saint Charles IL
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 41 of 48 people found this instruction helpful
First took down the hood/microwave and removed the sheet metal housing.
I changed HV diode as it was the least expensive component and the first one that internet suggested and tested bad with a ohm meter. Didn't fix a thing.
Capacitor failed test with meter so I ordered and then replaced this.
Still no change so I ordered a new magnetron. ... read more

My microwave began suddenly making a loud humming noise while cooking food.

  • Customer: Lindsay from Nampa ID
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 81 of 200 people found this instruction helpful
My microwave began suddenly making a loud harsh humming noise while cooking food. I did not let it go on long enough to know if it cooked the food or not. I did some Internet research and learned that it was likely the Magnetron. The test for this was to run the microwave for at least a minute on the lowest power setting and see if the noise cycled on and of... read more

Microwave made very loud noise while on. No heat.

  • Customer: Sleiman from Miami FL
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 18 of 23 people found this instruction helpful
Unless you have a very comfortable background with electronics and electricity, I don't necessarily recommend taking apart a microwave. If you are very handy and are going to be VERY cautious to follow the rules of discharging caps and testing voltages before moving forward, then go for it. That said, I took the microwave off and apart. Not knowing where ... read more