Models > CMS130BCLWH (8V050)

CMS130BCLWH (8V050) Maytag - Overview

Get Parts and Repair Help for CMS130BCLWH

If you know the repair part you need, you can browse the list of all parts on the CMS130BCLWH, or you can search by name or part description. You can also find your part by where it is located on the CMS130BCLWH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for CMS130BCLWH parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CMS130BCLWH [Viewing 3 of 3]

$2.70

Screw

This screw is sold individually.

$8.37

Light Rocker Switch

$6.58

Bulb - 120v 25w

$2.70

Screw

This screw is sold individually.

$3.96

Gate Support - Right Hand

$16.48

DRIER-UV

$16.38

Hinge Pin Bushing

This bushing is to be used with a 1/4 inch pin.

$8.38

SCREW

$3.83

CLIP

$9.76

BOLT

Common Symptoms of the CMS130BCLWH [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 36 of 43 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 25 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more

light inside fridge was flickering and clicking

  • Customer: bill from escondido CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 6 of 9 people found this instruction helpful
tested bulb good ,replaced door switch first(least expensive)then ordered light socket and circuitboard.If clicking sound is heard replace circuitboard first to save on return shipping because the switch and socket where ok read more