Models > CM15K-7BS-NB

CM15K-7BS-NB Magic Chef Microwave - Overview

Get Parts and Repair Help for CM15K-7BS-NB

If you know the microwave repair part you need, you can browse the list of all parts on the CM15K-7BS-NB, or you can search by name or part description. You can also find your part by where it is located on the CM15K-7BS-NB by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.


Light Bulb - 120v 25w


Door Release Button - Black










Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

arm on door release button broke

  • Customer: RICK from CASEY IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 9 of 9 people found this instruction helpful
First i removed the 3 phillips head screws from the back of the microwave,these hold the wrap around cover in place, then slid the wrap around cover off towards the back side of microwave, next from inside the microwave i removed 1 screw holding the front operating panel, this screw is located staight up from the push button towards the top of the microwav... read more

Door release button broke on the inside of microwave so door would not open

  • Customer: Steven from Burton MI
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
Pryed face plate away from body and removed broken latch, replaced with new latch/release button (just sets in place) and pressed faceplate back into position. The beauty of all this is, I ordered this part on line, late on a Tuesday evening and had it in hand by Thursday afternoon!
Well done! Thank you! read more

Light Bulb

  • Customer: Terri from Kingsland TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 9 people found this instruction helpful
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE! read more