Models > CLZ8560ADB > Instructions

CLZ8560ADB Magic Chef Cooktop - Instructions

All installation instructions for CLZ8560ADB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CLZ8560ADB
1-15 of 16
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The grommets came apart metal from rubber.

  • Customer: Frank from Pierce ID
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 14 people found this instruction helpful
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.

range top loose, grommets missing

  • Customer: joseph from wildomar CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 11 people found this instruction helpful
very easy to push each grommet into range top holes

burner would not light

  • Customer: Albert from Clewiston FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 7 of 9 people found this instruction helpful
saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.

missing gromet

  • Customer: Hal from National City CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 7 people found this instruction helpful
Pushed into hole by hand, really simple

Inside of knob busted out, would not turn ignitor.

  • Customer: DAVID from SEARCY AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Actually too simply to list as DIY job. Merely remove old knob and push new one onto spindle.

existing grates were very worn.

  • Customer: Alta from Rexford MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
Just ordered a new grate. Everyother place I talked to said the one piece grate would not fit, so I am very pleased with the service you offered.

Bushings were worn out

  • Customer: Fred from Spring TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 5 people found this instruction helpful
The parts were exactly correct. The website was complete and easy to use. The reair was a snap.

Finish errosion

  • Customer: Kenneth from Lakewood NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Replaced with new part

Igniter failed

  • Customer: Paul from Niland CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 7 people found this instruction helpful
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.

Knob would not turn igniter.

  • Customer: Harvey from Lynchburg TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simple off/on installation.

Lost on of the Rubber Grommet holding the stove grate

  • Customer: Martin from Millersburg MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
So simple would be embarrassed to give any instructions; it is so self evident.

Front flashtube extension rusted through, ignition knob stripped, rubber grommet missing

  • Customer: Henry from Omaha NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws from igniter cover, removed and replaced fron extension tube. Removed old knob and replaced. Replaced missing grommet. Saved other extension tubes as the old ones were still serviceable.

flashtube was burned off

  • Customer: john from mount vernon WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
put in new flashtube

Rubber grommet for stove top cover

  • Customer: Lisa from Plymouth MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job

range top was missing one of the rubber grommets used to hold the grate.

  • Customer: John from Elizabeth CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
All Instructions for the CLZ8560ADB
1-15 of 16