Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CLY2220BDB > Instructions

CLY2220BDB Magic Chef Range - Instructions

All installation instructions for CLY2220BDB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CLY2220BDB
16-30 of 32
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Finish errosion

  • Customer: Kenneth from Lakewood, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Replaced with new part

Bushings were worn out

  • Customer: Fred from Spring, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 6 people found this instruction helpful
The parts were exactly correct. The website was complete and easy to use. The reair was a snap.

thermostat temprature bulb hanger clips

  • Customer: Dwayne from Atlanta, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 4 people found this instruction helpful
snaped them into oven cavity attached temp bulb job complete

oven rack missing

  • Customer: Jimmy from Texarkana, AR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Odered rack on internet. Received in timely manner. Was the correct oven part. Very satisfied. Thank you.

Igniter failed

  • Customer: Paul from Niland, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 8 people found this instruction helpful
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.

Knob would not turn igniter.

  • Customer: Harvey from Lynchburg, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simple off/on installation.

Lost on of the Rubber Grommet holding the stove grate

  • Customer: Martin from Millersburg, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
So simple would be embarrassed to give any instructions; it is so self evident.

Front flashtube extension rusted through, ignition knob stripped, rubber grommet missing

  • Customer: Henry from Omaha, NE
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws from igniter cover, removed and replaced fron extension tube. Removed old knob and replaced. Replaced missing grommet. Saved other extension tubes as the old ones were still serviceable.

second oven rack

  • Customer: Donna from Bushnell, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I was very impressed with the ease in ordering the part, and the speed of delivery. All I needed was a second oven rack so that when I bake cookies, I can bake two trays instead of one, I get done in half the time now. Thank you Part Select!!!

flashtube was burned off

  • Customer: john from mount vernon, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
put in new flashtube

Rubber grommet for stove top cover

  • Customer: Lisa from Plymouth, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job

Pilot light went out after being lit and adjusting oven temp

  • Customer: Jennifer from Winnsboro, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench (Adjustable), Wrench set
  • 0 of 0 people found this instruction helpful
I was disappointed that directions did not come with the part, as I had never before made this repair. However, I turned off the gas connection, unscrewed the oven from its place in the wall, then removed the racks in the oven. Next, I loosened the nuts and screws of the pilot assembly in the oven and loosened the connection on top under the stove. Behind the stove, the copper wire of the thermocouple was fastened together with the others, so I disconnected that and removed the assembly. Next, I uncoiled the new copper thermocouple wire and fed its stove connection through the top rear of the stove, fit it to the connection, and tightened it. Then I fed the other end (with the pilot) through the back of the stove and connected it to the pilot brace. Tightened nuts into place, replaced oven racks, and screwed oven back into the wall. Turned on the gas, lit the pilot, and it immediately lit the stove! I would really have preferred directions, though. I felt intimidated by the whole thing, doubting myself as I made every step. So many ways to screw up...

Oven door handle broke in two pieces

  • Customer: Larry from Casa Grande, AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Remove two black Phillips head screws from the top of the oven door and two black Phillips head screws from the bottom of the oven door which releases the door from the oven. Remove the two Phillips head screws that hold the handle and discard broken handle. Install new handle onto door and then replace the door. Easy!!!

does not fit to small in side

  • Customer: barry from aberdeen, MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just put it on

range top was missing one of the rubber grommets used to hold the grate.

  • Customer: John from Elizabeth, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
All Instructions for the CLY2220BDB
16-30 of 32