Models > CLY1620BDB > Instructions

CLY1620BDB Magic Chef Range - Instructions

All installation instructions for CLY1620BDB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CLY1620BDB
16-29 of 29
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

thermostat temprature bulb hanger clips

  • Customer: Dwayne from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 3 people found this instruction helpful
snaped them into oven cavity attached temp bulb job complete

range handle fell off and screw got lost

  • Customer: Frances from palm beach gardens FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 3 people found this instruction helpful
It was worth the money for that little screw, since I didn't have to run all over trying to find the right one.

Igniter failed

  • Customer: Paul from Niland CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 7 people found this instruction helpful
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.

Knob would not turn igniter.

  • Customer: Harvey from Lynchburg TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simple off/on installation.

Broken trim parts on my RV stove

  • Customer: Stephen from Evanston IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the stove from the RV, unscrewed the old trim parts and installed the new ones, slid the stove back into it's slot in the RV. Piece of cake

Lost on of the Rubber Grommet holding the stove grate

  • Customer: Martin from Millersburg MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
So simple would be embarrassed to give any instructions; it is so self evident.

Front flashtube extension rusted through, ignition knob stripped, rubber grommet missing

  • Customer: Henry from Omaha NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws from igniter cover, removed and replaced fron extension tube. Removed old knob and replaced. Replaced missing grommet. Saved other extension tubes as the old ones were still serviceable.

second oven rack

  • Customer: Donna from Bushnell FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I was very impressed with the ease in ordering the part, and the speed of delivery. All I needed was a second oven rack so that when I bake cookies, I can bake two trays instead of one, I get done in half the time now. Thank you Part Select!!!

flashtube was burned off

  • Customer: john from mount vernon WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
put in new flashtube

Rubber grommet for stove top cover

  • Customer: Lisa from Plymouth MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job

Oven door handle broke in two pieces

  • Customer: Larry from Casa Grande AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Remove two black Phillips head screws from the top of the oven door and two black Phillips head screws from the bottom of the oven door which releases the door from the oven. Remove the two Phillips head screws that hold the handle and discard broken handle. Install new handle onto door and then replace the door. Easy!!!

does not fit to small in side

  • Customer: barry from aberdeen MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just put it on

range top was missing one of the rubber grommets used to hold the grate.

  • Customer: John from Elizabeth CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.

Wore out parts replaced

  • Customer: Alvin from Hudson FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Put new parts on & the only trouble I had , I had no ideal where the or how the Extension flash tubes went on had to take one of the burners off & looked it over & found out it had two little what I`ll call slices in it to put the tubes on after that it all went in place very easyly it all worked just fine
All Instructions for the CLY1620BDB
16-29 of 29