Models > CLR1100AJQ

CLR1100AJQ Maytag Range - Overview

Get Parts and Repair Help for CLR1100AJQ

If you know the range repair part you need, you can browse the list of all parts on the CLR1100AJQ, or you can search by name or part description. You can also find your part by where it is located on the CLR1100AJQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CLR1100AJQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.76

Levelling Leg

This leg is sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw

This screw is sold individually.

$30.71

Door Seal

This oven door seal prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

$51.29

Oven Rack

Used in the lower oven. Sold individually.

$3.83

SCREW

$2.77

Screw - sold individually

$17.33

ANCHOR-TIP

$2.70

Screw

This screw is sold individually.

$3.83

BRACKET

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

PILOT LIGHT WON'T STAY LIT

  • Customer: Peter J from Brooklyn NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 20 of 23 people found this instruction helpful
First I removed the oven door by pulling straight up off of the hinges in the open postion.
Next remove oven racks,then use 1/4 nutdriver to remove back screws on inside oven bottom plate.Next remove gold nut on silver tube @ pilot connection,then remove 1/4 nuts that hold pilot assembly.Next open top of stove and remove small gold nut "with the thin w... read more

Oven rack lost in a garage fire

  • Customer: Bob from Saint Clair Shores MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 13 of 16 people found this instruction helpful
First I opened the door to the oven. Then I opened the box that the part came in. (knife) I then slid the oven rack out of the box and unwrapped the plastic, being careful not to bend or scratch the new rack. Now, this is the tricky part... I had to move the existing rack down one space to make room for the new one. Then carefully slid the new rack in, ... read more

worn out door seal

  • Customer: Stella from Charlotte TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 11 of 12 people found this instruction helpful
removed old clips and remaining parts of old seal...new part already had clips attached, so just snapped them into holes in oven door. read more