Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CHW8990XW0

CHW8990XW0 Whirlpool Washer - Overview

Get Parts and Repair Help for CHW8990XW0

If you know the washer repair part you need, you can browse the list of all parts on the CHW8990XW0, or you can search by name or part description. You can also find your part by where it is located on the CHW8990XW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for CHW8990XW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drain Pump - 120V 60Hz

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. It has two ports for water to pass through: ...


Door Strike

Used to help make the door stay closed. Sold individually.


Shock Absorber

Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles.


Hose Clamp


Hose, Tub to Pump


Touch-Up Paint - White




This hose can handle hot or cold water and is five feet long.


Clamp, Bellow To Tub


Temperature Sensor

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.


Hose, Dispenser To Tub

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F 21 error

  • Customer: Andrew from St.Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 266 of 299 people found this instruction helpful
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. read more

water pump failed

  • Customer: Kurt from Caliente, NV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 60 of 65 people found this instruction helpful
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins. read more

Replaced Drain Pump on Whirlpool HE Duet Sport Washer

  • Customer: Shawn from Clyde, NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench set
  • 55 of 58 people found this instruction helpful
This do it yourself repair saved me the cost of a repair man's service call plus time to put it in. 1. First of all, make sure the unit is unplugged. On this type of front loading washer you will need to remove the bottom panel, which is secured by 3 nut screws. 2. Once the panel is removed you will need to use pliers to unscrew the drain plug and allow ... read more