Models
>
CGY366P4M1W2
CGY366P4M1W2 General Electric Range - Overview
Sections of the CGY366P4M1W2
[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS1020128
Manufacturer #: WR01X10590
This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. When installing this sc...
$8.06
In Stock
Ignitor Mounting Screw
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
In Stock
Handle Spacer
PartSelect #: PS221948
Manufacturer #: WB01K10020
This spacer is located between the handle and the outside door panel. They are sold individually, and are usually recommended to be purchased in pairs.
$8.16
In Stock
GRATE
PartSelect #: PS3503825
Manufacturer #: WB31K10252
See part 252 in the diagram
$163.93
In Stock
Orifice Spud - LP - Right Front - Simmer
PartSelect #: PS1016856
Manufacturer #: WB28T10118
$11.02
In Stock
Questions And Answers for CGY366P4M1W2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben
August 8, 2023
Can the range igniter be replaced for the inside. I have tried by it seems it needs access from the back of the stove for the electric plug. Do you have instructions for the replacement I can utilize. I don’t want to move from wall if it’s not going to help.
For model number CGY366P4M1W2
Hello Ben, thank you for reaching out. According to our research, you do not need to access the back of the range to replace the igniter plug. To replace the igniter, first remove the interior bottom panel from the oven. Then remove the gas valve shield and the small igniter cover. Pull the wires in and disconnect the plug. Then remove the screws from igniter and install the new igniter and reverse back the whole process. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the CGY366P4M1W2
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I broke the frame gate assembly by sitting on it. I ordered a new on and put it on. No tools required
I threw the old frame away and placed the new one on top of the stove
Parts Used:
-
William from UPPR MARLBORO, MD
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy, slow convection fan motor
Used the schematic on the website to order part and disassemble/reassemble with new fan motor. Works like new.
Parts Used:
-
Doug from RED FE LKS, CO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The electrode had broke
I unscrewed the base where the electrode was attached to detached the electrode detached the wire to the electrode inserted new electrode with holding spring and clamp attached wire to electrode.
I then put the base back on top and screwed in the two screws assembled the remaining parts and turned on the stove unit and it worked I am ... Read more very happy.
I then put the base back on top and screwed in the two screws assembled the remaining parts and turned on the stove unit and it worked I am ... Read more very happy.
Read less
Parts Used:
-
O.Robert from Montrose, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!