Models > CGLMV169DQC > Instructions

CGLMV169DQC Frigidaire Microwave - Instructions

All Instructions for the CGLMV169DQC
16 - 18 of 18
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cover was damaged
Slid old one out and slid new one in (under tabs).
Parts Used:
Stirrer Fan Cover
  • Genevieve from Lacey, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Microwave would not heat
Determining the root cause was fairly simple - but one should always identify the basic repair part first that may be the root cause - in this order - Diode - HV Capacitor - Magnetron due to costs of fixing the issue. I found that after replacing the two major components it may have been just the Diod/Rectifier a low coat resolution - but one never knows if the issue was one or many problems that wouldn't allow the Microwave to heat. The team at PartSelect was very helpful and was able to expidite the Magnetron to my residence to start the repair process KUDO's to the Customer Service Team!
Parts Used:
Magnetron
  • David from Findlay, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
annual replacement of filter
My husband did it by just taking off the panel on the top of the microwave and replace old with new. We cleaned up some of the accumulated grease as well on the microwave. He had a little problem with the screws. We have done this before so no big problem. Thanks
Parts Used:
Air Filter
  • Carol from Framingham, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CGLMV169DQC
16 - 18 of 18