Models > CGEB27S7CS2

CGEB27S7CS2 Frigidaire Oven - Overview

Get Parts and Repair Help for CGEB27S7CS2

If you know the oven repair part you need, you can browse the list of all parts on the CGEB27S7CS2, or you can search by name or part description. You can also find your part by where it is located on the CGEB27S7CS2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for CGEB27S7CS2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CGEB27S7CS2 [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Main Terminal Block Kit

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.


Temperature Sensor

Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.


Light Bulb Lens

This lens covers the interior oven light bulb.


Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.


Steel Washer

Size: 3/4 inch od x 1/4 inch id


Bake Element - 2300W

This bake element is found on the bottom of the oven.


Broiler Pan Grate Insert

Broiler pan sold separately.


Light Lens Retainer Clip

This retainer secures the light lens to the oven cavity.


Door Switch



Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not heating to desired temperature

  • Customer: Dan from Bellevue ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 72 of 109 people found this instruction helpful
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with tw... read more

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 40 of 70 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more

Oven Door Light Switches Wrecked by Heat from Oven

  • Customer: Gregory from Croton-on-Hudson NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 2 of 5 people found this instruction helpful
Pull old switches out with pliers and replugged new switches. On main oven, plug casing was melted (wife left broiler on with oven door closed) so had to break apart old casing and individually plug the the wires into new switch and amazingly, it worked! Just gotta keep the door open when broiling............. read more