Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CGBM187KBA > Parts

CGBM187KBA Frigidaire Microwave - Parts

All parts for the Frigidaire Microwave CGBM187KBA

Below is a list of all parts for the Frigidaire Microwave CGBM187KBA. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CGBM187KBA
1-14 of 118
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$20.62

Grease Filter

If you are having trouble cleaning out your grease filter, or if it is damaged to the point of no return, maybe it is time to replace it. The grease filter is a ventilator that tra...

$32.16

Relay Switch

The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or closed to the electronic control board. Before making this repair, you will want to make sure to unplug your microwave and discharge the capacitor. Your microwave capacitor is able to store electricity in large quantities even after it has been unplugged. The most common reason for replacing your relay switch is if the microwave will not turn on but your timer still runs..

$16.44

Light Bulb - 20W

This 20-watt lightbulb is most commonly found in the microwave. The lightbulb brightens the interior of the microwave while it is running so you can keep an eye on the food while i...

$59.99

Glass Cooking Tray

The glass tray, used in a microwave, holds food plates and containers on it. The glass tray, also known as a turntable, rotates when the microwave is heating up food to ensure the plate of food is evenly heated. If your glass tray is broken, shattered, or is not rotating when heating, it is best to replace it for better heating results. The tray has dimensions of 33 x 35.6 x 2.5 cm and weighs 455 grams. Refer to the manual provided by the manufacturer for installation instructions and guidance.

$9.68

FILTER

$34.22

Mounting Hardware Kit

$30.00

Door Latch Spring

The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If y...

$11.90

FILTER

$6.52

SCREW

$72.19

Turntable Roller Guide

The roller guide sits underneath the glass turntable tray in your microwave. If your microwave turntable tray is not rotating properly, you may need to replace the turntable roller guide. The function of this part is to house the glass plate, and rotate to cook food evenly. This part has a round piece in the middle, approximately 2 inches in diameter, and 3 arms which are approximately 4 inches in length each. Each arm has a small plastic wheel on the end that supports the glass turntable tray. This part is an OEM part sourced directly from the manufacturer, and is sold individually.

$28.50

DAMPER ASSEMBLY

This is an exhaust damper assembly for a microwave, which is also known as a microwave vent damper. The damper directs air flow through the vent duct from the top or rear of your m...

$6.46

SCREW; 3MM X 8MM

$28.09

RECTIFIER

$27.77

Mounting Bracket

This mounting bracket is used to mount microwaves to the wall when installing the unit over a range. This metal, genuine OEM mounting bracket is approximately 31 inches long x 2 inches wide. If you notice that your wall mounted microwave is pulling away from the wall, take it down immediately and check the mounting bracket and the screws used to fasten the bracket to the wall. If you notice any damage to the wall mounting bracket, look to replace it right away to avoid further damage to your wall, or to the microwave. The hardware to perform the installation for this part is sold separately.

All Parts for the CGBM187KBA
1-14 of 118