Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Jenn-Air Cooktop CG106L - Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This filter is intended for use with some downdraft cooktops and ranges. Sold individually.
This screw is sold individually.
To convert back to Natural Gas - you must save old orifices. If you no longer have the old orifices, the burner tubes must be ordered that contain the natural gas orifices.
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
This jar is used for collecting the grease drippings of gas ranges.
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
This is a switch that operates a solenoid that closes a circuit to operate the starter
This band screw is sold individually.
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for ignition.
Use of this rivet requires a rivet tool.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.