Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CFTR1826LK2

CFTR1826LK2 Frigidaire Refrigerator - Overview

Get Parts and Repair Help for CFTR1826LK2

If you know the refrigerator repair part you need, you can browse the list of all parts on the CFTR1826LK2, or you can search by name or part description. You can also find your part by where it is located on the CFTR1826LK2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CFTR1826LK2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.70

Refrigerator Door Shelf Bin

The refrigerator door shelf bin may also be known as the refrigerator door gallon bin. This part is an attachment for your refrigerator door. It clips into your refrigerator to act...

$21.88

Refrigerator Door Shelf Retainer/Bin

This refrigerator door shelf attaches to the inside of the refrigerator door, typically holds jars and bottles, and is generally the middle shelf for your food door. The shelf is white, plastic, has open square latches, and approximately 24 1/4 inches wide x 3 3/4 inches deep. You should replace your door shelf if it is visibly damaged, or is stopping your door from opening or closing. This OEM part is sourced directly from the manufacturer, fastens to the door with little effort, and is sold individually.

$23.51

Refrigerator Door Shelf Bin

This part is a door shelf bin made to hold food items on the door of the refrigerator. This is a genuine OEM part that is soured directly from the manufacturer. It is made of plast...

$75.24

Crisper Pan

Also called Vegetable Drawer. Sold individually.

$56.41

Crisper Glass Shelf Insert

Glass only.

$15.98

Defrost Thermostat

This defrost thermostat is also known as a refrigerator defrost bi-metal thermostat kit. The function of the defrost bi-metal thermostat is to prevent overheating during the defrost cycle in your refrigerator by protecting the evaporator. The most common sign that there is a problem with your refrigerator defrost thermostat kit is if your freezer is cold but your refrigerator is warm. If your evaporator coils are icy then your defrost bi-metal thermostat kit could be defective. To do this installation the tools you will need include a 1/4 inch nut driver, a pair of wire strippers and crimpers, and a heat gun.

$0.72

Screw

$28.41

Run Capacitor

The run capacitor helps the compressor kick on and off while maintaining a constant temperature in your fridge and freezer. You may need to replace your run capacitor if your refrigerator or freezer section will not start, if they are too warm, or if your refrigerator has become too noisy. Replacing the run capacitor is a relatively easy project. For this repair you will only need a 1/4 inch nut driver and needle nose pliers. Remember to disconnect the power and water supply line to the unit before you begin this repair. For full step by step instructions, simply click on the video below.

$9.36

Defrost Timer - 120V 60Hz

This defrost timer is designed for use in your refrigerator. The defrost timer acts as a clock, that switches the refrigerator from the freezing cycle to the defrost cycle and back...

$23.80

Dairy Door - Clear

This is a dairy door for your refrigerator. This part covers the products in the dairy bin section. To access this section, simply lift the lid. This dairy door is made entirely of plastic and is transparent. It is almost 10 inches wide, and roughly 6 inches long. In order to make this repair you will not need any tools, as this part will easily clip in and out of place of the hinged holes.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

grandkids had broken the top and middle shelf bins in my refrigerator door

  • Customer: Connie from Franklin, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 564 of 580 people found this instruction helpful
I simply snapped the proper pieces in place. It was sooo easy! read more

the shelf broke

  • Customer: iris from talahassee, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 464 of 466 people found this instruction helpful
snap and done read more

Door shelves were broken through uses.

  • Customer: ANDRE from GERMANTOWN, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 384 of 386 people found this instruction helpful
There were no screws to remove or add. All were snap on parts. read more