Models > CFMV157GMA

CFMV157GMA Frigidaire Microwave - Overview

Get Parts and Repair Help for CFMV157GMA

If you know the microwave repair part you need, you can browse the list of all parts on the CFMV157GMA, or you can search by name or part description. You can also find your part by where it is located on the CFMV157GMA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.


Door Handle - Black

Screws NOT included.




Glass Turntable Tray

This tray rotates in your microwave ensuring more even temperatures.


Grease Filter

Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.




Drive Motor

This motor rotates the glass turntable in the microwave and accepts a D- shaped shaft.


Mounting Plate

Mounting hardware sold separately.







Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The plastice door handle broke off at the ends on the front of the microwave

  • Customer: Tommy from Spring Hill TN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 70 of 77 people found this instruction helpful
Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.

I popped the inside of the door off of the microwave. I then unscrewed the two screws that were holding the next... read more

Microwave handle broke off

  • Customer: Nova from Phoenix AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 20 of 21 people found this instruction helpful
My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the hinges. After remo... read more

handle broken

  • Customer: Thomas from Maysville NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
Lifted the door up and removed entire door, took pry bar and removed the snap on plastic cover very easy. Has plastic snaps on the inside. Then removed the glass window same way. then you can see the two screws holding the handle on. Remove screws, then snap back together making sure you go slowly not to break any plastic snaps.The job was a lot eaiser than ... read more