Models > CFCS3WE3 > Instructions

CFCS3WE3 Whirlpool Ice Maker - Instructions

All installation instructions for CFCS3WE3 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the ice maker repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CFCS3WE3
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The water pump broke (too old).

  • Customer: NICOLAS from MCALLEN TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Socket set
  • 16 of 22 people found this instruction helpful
I removed the three nuts that hold the old pump, easy. Next step was to replace with the new pump, tricky, because it goes real deep in the machine and my arms barely reach it.
After several attemtps, I finally reached one screw and bolt it immediately. Rest was piece of cake.
What I liked most, is that you don't need to do any wiring connections, because it uses a simple plug-in connector that goes in at the same time when you bolt the new pump.
What it surprised me, was that my machine it's over 20 years old, and the new replacement water pump it's the very same design !!!
Last night I fixed it, and today I'm enjoying again fresh ice.
One plus for PartSelect : I inherit this machine and didn't have an Installation & Operation Manual,and PartSelect have it On-Line, so I printed it, and I believe I'm ready another 20 year period of fresh ice!
Thanks a lot PartSelect !!!

Noisy

  • Customer: Paul from Port Lavaca TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 17 of 26 people found this instruction helpful
Easy to do.!
All Instructions for the CFCS3WE3
1-2 of 2