Models > CF16DL9

CF16DL9 Frigidaire Freezer - Overview

Get Parts and Repair Help for CF16DL9

If you know the freezer repair part you need, you can browse the list of all parts on the CF16DL9, or you can search by name or part description. You can also find your part by where it is located on the CF16DL9 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for CF16DL9 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CF16DL9 [Viewing 1 of 1]

$6.68

Freezer Door Key

This metallic freezer door key is used for most upright or chest freezers.

$29.14

Hinge Kit

$4.38

SCREW

$6.43

Single Gasket Retainer Clip

Sold Individually.

$9.06

DRIER-FILTER

$6.71

Interior Drain Plug

$75.02

Door Gasket

This door gasket is used to seal the freezer door when closed..

$59.73

LOCK ASSY KIT

$32.91

Overload Protector

This part provides protection for the compressor motor against excessive current and excessive temperature use.

$25.44

Light Bulb - 25 watt

This bulb can be used in either refrigerator or oven. It is a clear, intermediate screw-in bulb.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Clicking sound then within a minute clicking again, not cooling.

  • Customer: Melvin from Semmes AL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 53 of 60 people found this instruction helpful
UNPLUG REFRIGERATOR. Carefully remove relay from the side of the compressor. You shouldn't need a tool to do this, if it is hard you can gently pry the edge with a flat head screw driver just to loosen. Unplug white and red wires from relay, noting that the white wire goes in the hole with a #2 stamped beside it. Shake old relay, if it rattles like a baby r... read more

Stopped working, cooling.

  • Customer: Jennifer from Jonestown TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 13 people found this instruction helpful
I used a small screwdriver to disconnect wires from old starter. I connected the overload and starter, two wires. I put the unit back in the keeper, plugged the unit in, turned up the thermostat and it's working beautifully. read more

replacement freezer keys

  • Customer: CHARLOTTE from SEDALIA MO
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 9 of 10 people found this instruction helpful
I accidently threw away both freezer keys to our upright Gibson and G.E. Freezers!!!! I had no luck finding replacements locally, so I got on the internet and came across PartSelect.com. I called them on the telephone; and after giving the model numbers of my freezers, the keys were on their way!! I received the keys very quickly and both worked perfectly. ... read more