Models > CEW30GF6GSJ

CEW30GF6GSJ Electrolux Range - Overview

Get Parts and Repair Help for CEW30GF6GSJ

If you know the range repair part you need, you can browse the list of all parts on the CEW30GF6GSJ, or you can search by name or part description. You can also find your part by where it is located on the CEW30GF6GSJ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CEW30GF6GSJ [Viewing 6 of 6]

$8.08

ANTI TIP KIT

$28.21

Oven Probe

$4.23

Steel Washer

Size: 3/4 inch od x 1/4 inch id

$7.09

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

$7.04

ORIFICE

$4.65

Leveling Leg

Sold Individually.

$5.27

Screw

Sold Individually.

$87.52

Pressure Regulator

This valve automatically cuts off the flow of gas at a certain pressure.

$79.29

IGNITOR

$7.41

ORIFICE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't operated. Error code F9

  • Customer: Richard from Centennial CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 15 of 18 people found this instruction helpful
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws ... read more

anti-tip bracket not installed

  • Customer: Brian from Panama City Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
I was selling my home and did not realize that the anti-tip bracket was not originally installed. A home inspection caught the problem and the buyers required that I install one. I could not find the original and obviously the installer never put it in place to begin with. The buyers wanted this resolved within a week so I had to act fast. I could not fi... read more

Regulator had propane leak past diaphragm

  • Customer: Albern from Bainbridge IS. WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Wrench set
  • 7 of 11 people found this instruction helpful
removed two screws disconnected inlet pipe and two outlet pipes, removed regulator. Replaced with new regulator. performed leak Test. read more