Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CEW30GF6GSG > Parts

CEW30GF6GSG Electrolux Range - Parts

All parts for the Electrolux Range CEW30GF6GSG

Below is a list of all parts for the Electrolux Range CEW30GF6GSG. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CEW30GF6GSG
1-14 of 214
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.18

Anti-Tip Kit

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, ...

$89.40

Bake Igniter

The oven burner igniter simply ignites the gas so it can heat the oven burner. The igniter does this by drawing electrical currents through the oven safety valve to open it. If the element shortens out, is no longer glowing, or is only glowing red or orange, replacing the igniter is the solution. You will need a wire splicing tool to do this repair. First, disconnect the wire harness from the igniter by removing the access panel on the rear of the stove. Next, access the front of oven and take out the racks before removing the bottom of the oven. For the rest of the installation instructions refer to the diagram provided by the manufacturer. Remember to unplug your oven from the power source before beginning this project.

$5.02

Steel Washer

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter ...

$8.15

ORIFICE

$6.34

Screw

Sold Individually.

$5.48

Leveling Leg

This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack or wear down over time. This will need to be replaced if it has broken or gone missing. If you notice your oven is wobbling or uneven it may be due to the leveling leg needing to be replaced. This part can be adjusted to accommodate different heights due to uneven flooring. This is a genuine OEM part sourced directly from the manufacturer.

$46.23

RACK

$8.78

ORIFICE

$8.76

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

$28.64

Oven Door Light Switch

$100.83

Pressure Regulator

This valve automatically cuts off the flow of gas at a certain pressure.

$11.59

FAN BLADE

$8.84

NUT

$223.39

Oven Rack with Glides

All Parts for the CEW30GF6GSG
1-14 of 214