Models > CDE852

CDE852 Maytag Range - Overview

Parts and Repair Help for models starting with CDE852

If you know the range repair part you need, you can browse the list of all parts for models starting with CDE852, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CDE852 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with CDE852

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.53

Light Bulb - 40W

Sold individually.

$11.45

Grease Filter

The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, if this filter is 1/2" less wide than the original, it will still function the same.

$7.67

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$7.93

Drip Bowl - Chrome - 8"

Sold individually.

$5.13

Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

$2.71

Screw

This screw is sold individually.

$2.71

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an ...

$58.08

Infinite Switch - 240V

This part is used for the 6" and 8" burners. Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same.

$28.47

Electric Surface Element - 6"

This surface burner with reinforced delta frame carries 1250W and 240V.

$18.91

2 Piece Broiler Pan

The top of this part is now black.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace Grease Filter

  • Customer: Gene from Washington C.H., OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 501 of 506 people found this instruction helpful
Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one. read more

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 136 of 147 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

Burner had one temperature--hot, regardless of setting

  • Customer: James H from Oxford, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 70 of 77 people found this instruction helpful
1. Killed power and removed the regulator's knob, noted the position of the old control.
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the h... read more