CDB3100AWT Magic Chef Dishwasher - Instructions

It took less then 10 minutes to rplace the new gasket. I think that Maytag is way ahead of the competion on this. The Dishwasher is now back to working and no more leaks.

Disconnect power. Turn off water supply. Removed front lower cover (4) screws. Disconnect solinoid quick connectors. Remove/disconnect inlet water line. Remove outlet hose. Remove mounting screws. Replace valve.

Removed inside door cover, removed wire connections, & removed what I would call a solenoid device. Then installed new one.

I took out the old gaskets and replace them after I clean and dried them. very easy. I'm a woman and if I can do it anyone can. Although I used the parts it did not fix the problem. So with help of parts select I'm on to the next solution. They're great fast fast on your supplies.

Bought extra parts incase I messed up. Fitted the wheel to the rack fairly quickly. Had to remove one rack stop, with a pair of pliers, in order to completely remove the rack from the moveable tracks. Folded over one of the rack stops and locked it in place completely. This is the wrong thing to do as it will not slide into the end of the moveable track. The trick is to partially fold the rack stop and start it into the moveable track. Then when the rack stop is inside the moveable track you can finish completing the folding of the rack stop. Once folded completely it is impossible to get the part unfolded.

I followed the video provided with the Order Acknowledgement. Very Very simple and easy to do. This is without a doubt the best company I have ever dealt with online. Prompt, quick delivery and very professional. The only mistake I made was not ordering the O ring for the soap dispenser. I am in the process of ordering that right now. This is the go 2 place for appliance repairs for sure. You won't be disappointed in any way.

Ordered parts on Saturday, and they arrived Tuesday. Followed the instructions in the video. It could not be easier. I may turn pro when I retire.

removed racks - removed lower wash arm - removed filter screen - removed upper pump cover - removed broken wash impeller - replaced wash impeller - re-installed upper pump cover - re-installed filter screen - re-installed lower wash arm - re-installed racks

Orient the gasket so that the more squishable hollow side of the gasket faces the door, and check that the length is sufficient to fill ths entire channel. The less compressible side goes into the channel, which requires some skill and strength to seat well. The flat portion of the more or less square gasket has two edges to it. What works best is to put the edge that is toward the inside of the dishwasher into the channel with your fingers, and then press in the other edge firmly with the small spatula of about 2 or 2and 1/2 inches until you can no longer see that edge. This is the visual indication it is seated. in the corners you may only be able to use a corner of the spatula.

After finding the part cheaper on your website and watch you video it was a peice of cake. and the pump only took like 4 days to get here during the holidays. Jim

Installed a new grommet on the soap door latch. Replaced door seal at customer request. The door seal ordered was to short. Replaced door spring clips at customer request. Split the door, remove 2 screws from inside the inner panel, grommet is between the inner panel and latch mechanism. Line the new grommet before install.

unscrewed 7 torx screws with the impact driver. removed the motor from the bracket. comes out pretty easily. moved wires aside. Pulled the wires off the motor using the pliers- one came off very hard, note where they go, corroded in place. installed the new motor by easily re-attaching the leads. Biggest surprise was that there were 2 motors. I initially replaced the lower one which did not solve the problem. When I replaced the upper, it worked. Not sure of the function of the lower motor. The upper one clearly fits into a slot which seems to attach to the doors.

Opened lower panel to better locate noise ( ran in drain mode to pinpoint ). Removed lower tray & started taking apart , found the discharge pump housing had broken on the inside. Ordered parts , they came in a few days & put back together. All works fine & it runs quieter than before it broke

simply replaced the ring and the water inlet injector, no tools need on that part of the repair

Go to computer, log onto PartSelect, order part. Two days later, go to mailbox, open package. Go back to computer, log onto PartSelect, watch instructional video on how to install the part. Go to kitchen, do what the video showed you to do. Job done.