CDB1500AWW Magic Chef Dishwasher - Instructions

Finally had to remove front foot panel and laminated top. Removed screws on back and one side to get to open cabinet to insert hose properly.

Opened dishwasher door (all the way down) removed all the screws around inside of door/ lift up back of door, removed handle assembly, used a sharpie marker to mark were wire connectors go back to, then used screw driver to pop off wire connectors.

I watched the video repair program and it was just that simple. What was the most amazing is from the time we called in the order until we got the parts and made the installation was less than 72 hours. We simply cannot believe how easy this was. Thanks ever so much!!!!

unscrew door and replace door handle.
5 to 10 minute job

I watched your video on how to install the part. The actual job went as smoothly as shown. Saved a large repairman's fee. Thanx!

Replase door lach Thang you for the fast respons Peter Hansen

Removed the inside door panel. Removed old, broken latch. Disconnected the two wire plugs. Connected the wire plugs to the new latch. Installed new latch into door. Replaced inside door panel.

easy to do unscrewed the plastic on the inside of the door lifted it out of the way takeing care not to damage the wires that are connected to it for the soap dispenser. the old latch fell right out the 4 wires where a bugger to get off and i actually destroyed the switches while unhooking the wires i plugged the wires into the next latch that came with new switches put everything back together and i open and closes like brand new

removed inside panel disconnected switch replaced with new handle and switches.

Works great

Removed the upper spray supply manifold and the lower spray arm, and all other pieces to reach the chopper assembly, removing those pieces, installing the new pieces, and put everything back together. Success! The dishwasher is working as good as new.

i simply removed the screws holding the cover ithen removed the old handle by removing the electrical wires i then plugged the wires onto the new handle i then placed the handle back on the machine replaced all the screws plugged the unit back in and the little lady was so happy she could wash dishes again she bar-b-qued me a big t-bone steak for dinner. THANKS PARTSELECT YOU SAVED THE DAY.

remove door panel screws but in new handle renstaall panel screws done.

As a very capable "do-it-yourselfer," once I realized that I had a part that I could not repair, the first thing I did was go to partselect.com to find my part. The exploded diagrams made it easy to determine the correct part I needed. A very reasonable $25 dollars and 2 days later the part showed up on my doorstep, well packaged to protect it during shipping and was an exact replica of the failed part. Five minutes later, I had the part replaced and a wife who is once again grateful to not have to wash the dishes by hand. Thanks partselect.com you made me a hero!

I'm so happy I ordered these wheels, with them it's running
like new. Without the wheels it was making grinding sounds when it ran. You just push them onto the rack spokes and snap them in place. EASY!

i read how it was done on this web site