Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CCR567B-C

CCR567B-C Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CCR567B-C

If you know the cooktop repair part you need, you can browse the list of all parts on the CCR567B-C, or you can search by name or part description. You can also find your part by where it is located on the CCR567B-C by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CCR567B-C

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Surface Burner Switch

This switch controls the stove top surface burner and has a double-flat shaft.


Screw, 8/18 x 3/8

This screw is sold individually.


Infinite Switch Grommet


Infinite Knob

This infinite knob is black in color and is two inches in diameter. It is only an inch high and it has a gray indicator dot.



Indicator Light

Infinite Knob

Sold Individually. This knob takes a double-flat shaft.




Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

old switch had shorted and burned out

  • Customer: Larry from Hampton Cove, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 28 of 39 people found this instruction helpful
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have been oveer $1000. P... read more

Old knobs became loose

  • Customer: fabienne from dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
In spite of a 10 year old model, we could find the correct new knobs, and replacement was very easy. The knobs were not in inventory but we got very good information about expected availabilitry, then delivery date. and they came very well. read more

switch for burner, when turned on, would set breaker to off

  • Customer: Gail from Sedona, AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 6 of 12 people found this instruction helpful
Lifted stove top from counter, removed screws securing glass top, removed screws from switch housing. Removed color coded wires from old switch, one at a time, and secured them to the new switch. Put it all back together and just like new. Probably saved $200 service call. read more