Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CCGP2720P

CCGP2720P Jenn-Air Cooktop - Overview

Parts and Repair Help for models starting with CCGP2720P

If you know the cooktop repair part you need, you can browse the list of all parts for models starting with CCGP2720P, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with CCGP2720P

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This screw is sold individually.


Gas Valve Knob

This gas valve knob is a little over two inches in diameter. It is a black knob that has white lettering aroud its perimeter denoting the different temperature levels: low, medium, high, etc. This valve knob is made of plastic and will accept a 'D' shaped shaft.


Screw, 8/18 x 3/8

This screw is sold individually.



This part creates the spark that lights the gas and starts the burners.


Surface Burner Cap - Black - Large

This part helps the flame to spread for even heat. Also protects your burner head from spills.


Burner Cap


Drain Jar Lid

This grease jar lid is used for some of Maytag/Jenn-Air's brands of ranges and cooktops. This lid is not quite an inch high and is three inches in diameter.

Burner Switch Knob

Sold Individually. This knob acceps a double-flat shaft.


Glass Grease Collecting Jar

This jar is a little over five inches long. It is made of glass and is used for collecting the grease drippings of gas ranges.


Mounting Nut

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burners kept clicking after ignited

  • Customer: Robert from Ranchos de Taos, NM
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 14 people found this instruction helpful
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I did was grab the he... read more

would not stop igniting even after fire was on

  • Customer: Bill from Pearland, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Wrench set
  • 16 of 26 people found this instruction helpful
unplugged unit from wall, disconnected gas line, and untaped the vent. disconnect the control knobs and unplugged and removed the control unit from the main unit. pulled the main unit out from the countertop and set it on a table. disconnect the burners and spark iginiters from the main unit. undo screws holding chrome brackets and stove base, to access igin... read more

stove top gas burner ignitor only flicks but does not light burner

  • Customer: Marlene from Dana Point, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 10 of 13 people found this instruction helpful
If you have a burner that begins to constantly flick without lighting, and/or flicks while you are lighting another burner, it is likely time to order a new ignitor. Once received, we first lifted the burner support rack, then the burner cap, then unscrewed the nut holding the metal bracket that holds the ignitor in place (years ago we had to "soak" the nut... read more