Models > CCGP2420P Maytag

CCGP2420P Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CCGP2420P

If you know the cooktop repair part you need, you can browse the list of all parts on the CCGP2420P, or you can search by name or part description. You can also find your part by where it is located on the CCGP2420P by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

This screw is sold individually.

$2.70

Screw

This screw is sold individually.

$19.50

Gas Valve Knob

Sold Individually. This knob accepts a D-shaped shaft.

$18.74

USE WPL 71002724

$3.83

USE WPL 71002746

$8.12

USE WPL 71002747

$36.76

USE WPL 74007199

$37.64

USE WPL 74007187

$23.11

USE WPL 71002720

$27.93

USE WPL 74007183

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

would not stop igniting even after fire was on

  • Customer: Bill from Pearland TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Wrench set
  • 14 of 21 people found this instruction helpful
unplugged unit from wall, disconnected gas line, and untaped the vent. disconnect the control knobs and unplugged and removed the control unit from the main unit. pulled the main unit out from the countertop and set it on a table. disconnect the burners and spark iginiters from the main unit. undo screws holding chrome brackets and stove base, to access igin... read more

Burners kept clicking after ignited

  • Customer: Robert from Ranchos de Taos NM
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 8 people found this instruction helpful
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I did was grab the he... read more

stove top gas burner ignitor only flicks but does not light burner

  • Customer: Marlene from Dana Point CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 8 of 9 people found this instruction helpful
If you have a burner that begins to constantly flick without lighting, and/or flicks while you are lighting another burner, it is likely time to order a new ignitor. Once received, we first lifted the burner support rack, then the burner cap, then unscrewed the nut holding the metal bracket that holds the ignitor in place (years ago we had to "soak" the nut... read more