Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CCE9300GG

CCE9300GG Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CCE9300GG

If you know the cooktop repair part you need, you can browse the list of all parts on the CCE9300GG, or you can search by name or part description. You can also find your part by where it is located on the CCE9300GG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$52.86

Surface Burner Switch

This switch controls the stove top surface burner and has a double-flat shaft.

$43.42

Dual Surface Burner Switch Kit

This switch is used to operate the dual surface burner.

$86.13

Dual Radiant Element with Limiter

$7.35

CLEANER

$71.56

Surface Element Kit with Limiter - 6"

This ceramic element kit comes with an overheat limit switch, two wires, and two wire connectors.

$88.42

ELMNT-SURF

$8.60

Indicator Light

$5.63

SCREW

$4.90

Plate Nut

DISCONTINUED

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Outer element of dual element burner didn't work

  • Customer: Michael from Collierville, TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Socket set
  • 108 of 139 people found this instruction helpful
Remove Ceran Galss top by removing hex screws below the rim. Also remove the two opposing screws in the center of the downdraft opening. Ceran top comes off easily now.
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new sw... read more

Outer Ring of Dual Radiant Burner Does Not Come On

  • Customer: Christopher from Fredericksburg, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 32 of 44 people found this instruction helpful
Undid two screws on underside of cook top, lifted and exposed underside. Transferred wires from the faulty burner to the new burner, one at a time, paying close attention to their respective position on the wiring posts/terminals. Undid two screws holding old burner and then mounted the new burner to underside of cook top. Was really simple to do. :) read more

The repair itself was very easy. “How to connect” was very hard to get.

  • Customer: Igor from Campbell, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 25 of 32 people found this instruction helpful
The repair itself was very easy. “How to connect” was very hard to get.


To get access to the switch, unscrew 2 screws from each side of front panel and then 4 screws from the bottom of it (open the door first). Have a box or a small table about 30” high to use it as support for the front panel.

The end result (colors for the Righ... read more