Models > CCE9300BF

CCE9300BF Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CCE9300BF

If you know the cooktop repair part you need, you can browse the list of all parts on the CCE9300BF, or you can search by name or part description. You can also find your part by where it is located on the CCE9300BF by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$58.06

Surface Burner Switch

This switch controls the stove top surface burner and has a double-flat shaft.

$42.82

Dual Surface Burner Switch Kit

This switch is used to operate the dual surface burner.

$91.18

Dual Radiant Surface Element with Limiter

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

$8.35

USE MCN TJ114

$60.64

Surface Element Kit with Limiter - 6"

This ceramic element kit comes with an overheat limit switch, two wires, and two wire connectors.

$4.46

Indicator Light

$113.75

Burner Element with Limit Switch - 8"

$4.60

Plate Nut

DISCONTINUED

GUIDE, COOKING (TRILINGUAL)

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Outer element of dual element burner didn't work

  • Customer: Michael from Collierville TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Socket set
  • 77 of 103 people found this instruction helpful
Remove Ceran Galss top by removing hex screws below the rim. Also remove the two opposing screws in the center of the downdraft opening. Ceran top comes off easily now.
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new sw... read more

replaced heating element on flat surface stove top

  • Customer: dennis from assonet MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 18 of 25 people found this instruction helpful
I removed 4 screws and then lifted up the top it gave me access to the element I followed the direction that came with the element (very clear to follow) removed and installed the new element and it worked fine. Remember to unplug the stove if it is electric this is not in the instructions. read more

Outer Ring of Dual Radiant Burner Does Not Come On

  • Customer: Christopher from Fredericksburg VA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 19 of 29 people found this instruction helpful
Undid two screws on underside of cook top, lifted and exposed underside. Transferred wires from the faulty burner to the new burner, one at a time, paying close attention to their respective position on the wiring posts/terminals. Undid two screws holding old burner and then mounted the new burner to underside of cook top. Was really simple to do. :) read more