Models > CCE700

CCE700 Maytag Range - Overview

Get Parts and Repair Help for CCE700

If you know the range repair part you need, you can browse the list of all parts on the CCE700, or you can search by name or part description. You can also find your part by where it is located on the CCE700 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CCE700 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$2.70

Screw

This screw is sold individually.

$36.18

Door Hinge

This hinge is located on each side of the oven door.

$19.30

2 Piece Broiler Pan

$49.79

Bake Element

This bake element is found on the bottom of the oven.

$106.52

Interior Window Assembly

This part includes 2 panes of glass enclosed in a metal frame. It's the innermost window for your oven door.

$55.91

Oven Door Seal

This oven door seal prevents heat from escaping the oven cavity when in use.

$52.46

Temperature Probe

This temperature probe consists of two ends joined together by an insulated wire. The small end, the jack, plugs into the range, while the longer end, the probe, is inserted into the meat.

$2.70

Screw - 6-32 x 5/16

$2.70

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 21 of 32 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Oven door doesn't completely close, light stays on

  • Customer: John from Harvard MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 18 of 30 people found this instruction helpful
I replaced the hinges on the door, it wasn't that hard to do, a couple of minor things I had to overcome. But the new hinges still don't close the door completely. The light still comes on. I don't think the springs in the hinges are strong enough.

I asked for a particular part number in my order, the sales rep, said that wasn't the correct... read more

Oven door wouldn't close completely

  • Customer: William from Statesville NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 10 people found this instruction helpful
Parts arrived in three days and it was an easy swap of the hinges but the same problem still existed: the oven door wouldn't close completely, so the oven light stayed on and the convection wouldn't work either unless the door closed all the way. The replacement hinge's springs apparently aren't strong enough to close it and the springs aren't adjustable - w... read more