Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CCE407B

CCE407B Jenn-Air Cooktop - Overview

Parts and Repair Help for models starting with CCE407B

If you know the cooktop repair part you need, you can browse the list of all parts for models starting with CCE407B, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for CCE407B parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with CCE407B

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.84

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

SCREW

BOX, BREAKER

BURNER BOX

BREAKER (30 AMP)

WIRE CABLE ASSY

WIRE CABLE ASSY

CONTROL HARNESS

HARNESS, CONTROL

PARTITION

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 138 of 149 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

Burner was out but the burner coil worked on onother burner

  • Customer: Richard from Orange, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 6 of 6 people found this instruction helpful
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select. read more

The heating element socket had crumbled with age.

  • Customer: Edward from Webster, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
Changing the socket with a new one simply required removing one screw and splicing the two existing wires to the pigtails on the new socket. It took longer to unpack the replacement part than actually doing the job. read more