Models > CASE7073LA0

CASE7073LA0 Frigidaire Dryer - Overview

Get Parts and Repair Help for CASE7073LA0

If you know the dryer repair part you need, you can browse the list of all parts on the CASE7073LA0, or you can search by name or part description. You can also find your part by where it is located on the CASE7073LA0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for CASE7073LA0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$47.18

High Limit Thermostat

This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when th...

$7.04

Door Strike

"Male" piece of a dryer door closing mechanism.

$66.46

Blower Housing with Blower Wheel

$6.93

CATCH

$115.78

Heater - 3 Element - 5500W

$23.91

Control Thermistor

This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating. This part is located in the blower housing.

$5.27

SCREW

$25.23

High Temperature Adhesive

Used for installing felt and rubber seals on dryers.

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$2.84

Screw

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker Repair

  • Customer: Kristi from Winfield WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 6 of 8 people found this instruction helpful
The ice maker wouldn't fill with water. The maker itself appeared to operate but the tray would not fill. I ordered the part from PartSelect.com. The website allowed me to conveniently match a picture of the part with my part on the refrig. I ordered the part and it arrived in two days. I was impressed!

I turned the water to the ice maker off... read more

Broken Door Strike

  • Customer: William from Martinsville IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 5 of 9 people found this instruction helpful
After the part arrived, I located a pair of needle nose pliers. Then removed the broken one and inserted the new one. It was very easy.
I also noted that the new part was of a better design than the original. It should not need further attention. read more

Blower wheel was raddling

  • Customer: jena from loganville GA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 11 of 30 people found this instruction helpful
The blower wheel was a bit difficult, but manigable to do yourself. read more