Models > CAF19DMB

CAF19DMB General Electric Refrigerator - Overview

Get Parts and Repair Help for CAF19DMB

If you know the refrigerator repair part you need, you can browse the list of all parts on the CAF19DMB, or you can search by name or part description. You can also find your part by where it is located on the CAF19DMB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CAF19DMB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CAF19DMB [Viewing 3 of 3]

$6.68

Freezer Door Key

This metallic freezer door key is used for most upright or chest freezers.

$3.00

SWITCH LIGHT

$47.63

Defrost Timer

This refrigerator defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are...

$25.25

Door Shelf Retainer Bar End Cap Kit

This door shelf retainer bar end cap kit contains two white end caps.

$12.82

Power Cord

$2.49

SCR 8-18 AB IHXW 9/16 S

$6.41

BEARING-HINGE BOTTOM

$17.09

CLIP-PKG 12

$15.46

BEARING

$6.20

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 36 of 40 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

display showed dE

  • Customer: Nancy from Hamburg NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 37 of 61 people found this instruction helpful
popped off front grille, removed 2 screws for bracket, then had to remove one screw for timer. unplugged old timer, reversed procedure, all works. read more

refrigerator was not cooling but the freezer worked fine.

  • Customer: Wanda from Cabins WV
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 20 of 24 people found this instruction helpful
My husband put on the defrost timer. At first I thought the part was not going to fix the problem. After about 5 hours my refrigerator was still warm. I went to work and when I got home that evening my refrigerator was cooling and down to 28 degrees. So if you replace this part wait at least 12-24 hours. Give it time to stablize. My husband says it h... read more