Models > CAE1700BCB

CAE1700BCB Maytag Refrigerator - Overview

Get Parts and Repair Help for CAE1700BCB

If you know the refrigerator repair part you need, you can browse the list of all parts on the CAE1700BCB, or you can search by name or part description. You can also find your part by where it is located on the CAE1700BCB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CAE1700BCB [Viewing 1 of 1]

$3.76

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$87.85

Radiant Surface Element with Limiter - 8"

$23.12

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$162.30

Cartridge Glass Top - Black

$63.63

Radiant Surface Element with Limiter - 6" - 1200W

$3.82

SCREW

$4.60

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$3.82

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$4.60

SCREW

USE WPL 5700M527-60

Common Symptoms of the CAE1700BCB [Viewing 1 of 279]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

6" burner on the radiant surface started smoking and burned out.

  • Customer: Johnny from Henderson NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 14 of 21 people found this instruction helpful
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in ... read more

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 11 of 18 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

large element failed

  • Customer: Charles from Mamaroneck NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 9 of 19 people found this instruction helpful
Easy removal (lift and pull) of the the two element unit from the Jenn-air stove top. Placed unit right side up on a work surface. used a nut driver to remove 12 screws from the unit. removed the glass cook-top, revealing the two elements. Un-hooked two wires off the old damaged element, placed wires (plug and play) onto the new unit, then replaced the glas... read more