Models > CADE165SAL > Parts

CADE165SAL General Electric Dryer - Parts

All parts for the General Electric Dryer CADE165SAL

Below is a list of all parts for the General Electric Dryer CADE165SAL - Electric dryer. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CADE165SAL
1-14 of 138
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$46.29

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...

$8.52

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

$14.88

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$2.79

LATCH DOOR

$3.84

Adjustable Leveling Screw

$14.39

High Limit Thermostat

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in when the temperature drops to 210 degrees Fahrenheit. (Limit: 260-50)

$23.29

Front Drum Slide Kit

This front drum slide kit comes with two slides with the apppropriate mounting hardware.

$1.70

Screw

This screw is sold individually.

$36.29

Blower Wheel

This wheel attaches to the motor.

$151.62

Motor

If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

$12.89

Terminal Block and Grounding Strap

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electric...

$117.71

Heating Element Coil with Housing - 240V

$9.31

CLAMP& SCREW

$1.93

HINGE BUSHNG

All Parts for the CADE165SAL
1-14 of 138