Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CA24WCK0

CA24WCK0 Crosley Air Conditioner - Overview

Get Parts and Repair Help for CA24WCK0

If you know the air conditioner repair part you need, you can browse the list of all parts on the CA24WCK0, or you can search by name or part description. You can also find your part by where it is located on the CA24WCK0 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for CA24WCK0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Cover Screw

Sold individually.

$4.79

Washer, Support

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed alongside the drum support rollers and idler pulleys. If you notice that your dryer is making an unusual sound it could be due to the washer becoming loose on the drum support. They help prevent the rollers and pulleys from bumping up against the brackets they are installed on. If you are replacing the rollers, we suggest you replace the washers at the same time.

$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$21.42

Control Knob

This control knob may also be known as the selector knob or the room air conditioner rotary switch knob, and is compatible with your room air conditioner. The part will allow you to shift the rotary switch to pick which cooling and fan modes you prefer. This piece is sold individually, it comes in a light gray shade, and accepts a D-shaped shaft. You can easily make this repair by pulling the old knob directly off its post to remove it, and snapping the new part in its place. This model measures to be about one inch in diameter.

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$30.25

Silicone Rubber Adhesive - 2 oz

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any internal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

$56.02

Air Filter

This part is sold individually. The air filter is part of your room air conditioner and prevents dirt, dust, and other debris found in the air from getting inside your home. Over t...

$23.20

Motor Clip

$4.87

TIE-WIRE

$3.75

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

window ac thermostat stuck in on position

  • Customer: Walter from Chesapeake, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
Part came quickly, was the right part and went in quickly. Only had to drill out 3 rivets anre reasemble with sheet metal screws. read more

Filter was filthy, no telling how long it had been since changed

  • Customer: SHIRLEY G. from Mabank, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 8 people found this instruction helpful
Took out old filter and replaced it with the new filter read more

Air conditioner kept "hard starting" - Not kicking the compressor readily

  • Customer: Billy from Northfield, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 2 people found this instruction helpful
Well - first I thought the problem was the capacitor, as that will cause hard starts, especially on an air conditioner (I am no HVAC man, but researched this to find out). Pulled the capcitor (BE CAREFUL - discharge first - It CAN kill you if you don't!). Tested it and found it fine (again - to test - research on the net - VERY easy w/ a standard Ohm meter... read more