Models > BPDH5000FS0 > Instructions

BPDH5000FS0 KitchenAid Dehumidifier - Instructions

All installation instructions for BPDH5000FS0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dehumidifier repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the BPDH5000FS0
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dehumidifer collection pan (bucket) overflowing with water

  • Customer: Carl from Tuscaloosa AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and replace.

The humidifier would run continuously regardless of the humidity setting.

  • Customer: Stephen from Richfield NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I removed the old humidistat and replaced it with the new one which was an exact fit.
All Instructions for the BPDH5000FS0
1-2 of 2