Quick Question!

Have you ever purchased from PartSelect.com before?

Models > BLRT86TES8

BLRT86TES8 Frigidaire Refrigerator - Overview

Get Parts and Repair Help for BLRT86TES8

If you know the refrigerator repair part you need, you can browse the list of all parts on the BLRT86TES8, or you can search by name or part description. You can also find your part by where it is located on the BLRT86TES8 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for BLRT86TES8 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$23.51

Refrigerator Door Shelf Bin

This part is a door shelf bin made to hold food items on the door of the refrigerator. This is a genuine OEM part that is soured directly from the manufacturer. It is made of plast...

Order within the next 8 hrs and your part ships today!
$28.28

Meat Drawer Rail - Right Side

As you look into the fridge, this drawer support track is located on the right-hand side. This item is white in color and made of plastic. The drawer support track can wear out over time. The only tool required is a Phillips screwdriver. Empty out the drawer and remove it by sliding it forward. Lift out the shelf, remove the screw on the side of the shelf, remove the rail by pushing the rail forward and snapping out of place, insert new rail, and install the screw back in. Now the shelf can be put back into the refrigerator. The mounting screws are sold separately.

Order within the next 8 hrs and your part ships today!
$72.78

Crisper Pan

Also called Vegetable Drawer. Sold individually.

Order within the next 8 hrs and your part ships today!
$13.80

Defrost Timer - 60Hz 120V

Defrost timers are part of the defrost circuit in your refrigerator and freezer. This timer cycles the defrost heater on and off. For every eight hours, the appliance timer will cycle for 30 minutes. The defrost heater is what melts the frost buildup on the evaporator coils, and it can prevent your freezer from frosting up. If your timer fails, the heater will not get the energy it needs to run, and frost will continue to build up. Test the defrost thermostat and the defrost heater with a multi-meter. If they are in working order it is likely that the defrost timer is the faulty component of the circuit and needs to be replaced. Before you begin this repair make sure the appliance has been unplugged.

Order within the next 8 hrs and your part ships today!
$56.15

Crisper Glass Shelf Insert

Glass only.

Order within the next 8 hrs and your part ships today!
$29.15

Meat Drawer Rail - Left Side

This drawer rail supports the left hand side of the sliding drawer. The mounting screws are sold separately.

Order within the next 8 hrs and your part ships today!
$33.81

Evaporator Fan Motor Kit - 120V 60Hz

The evaporator fan motor circulates air through the food compartment for efficient cooling in refrigerators. The evaporator is located in the back of the freezer and it circulates ...

Order within the next 8 hrs and your part ships today!
$15.98

Defrost Thermostat

This defrost thermostat is also known as a refrigerator defrost bi-metal thermostat kit. The function of the defrost bi-metal thermostat is to prevent overheating during the defrost cycle in your refrigerator by protecting the evaporator. The most common sign that there is a problem with your refrigerator defrost thermostat kit is if your freezer is cold but your refrigerator is warm. If your evaporator coils are icy then your defrost bi-metal thermostat kit could be defective. To do this installation the tools you will need include a 1/4 inch nut driver, a pair of wire strippers and crimpers, and a heat gun.

Order within the next 8 hrs and your part ships today!
$0.72

Screw

Order within the next 8 hrs and your part ships today!
$7.71

SOCKET

The light socket on your refrigerator houses the light bulb and connects it to the power source. If you notice that your refrigerator light does not come on when you open the door, you may need to replace the light socket. This light socket is made of white plastic with two metal prongs. The light socket is located inside the refrigerator. Many of our customers have rated this repair as easy. To complete this repair, simply pop the old socket out with a small flat blade screwdriver and disconnect the wires. Then simply reconnect the wires to the new socket, and snap it in place with the locking tab.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

evaporator coil kept freezing up, refridgerator warm.

  • Customer: Greg from Hanover Township, PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 156 of 170 people found this instruction helpful
This was the second part I tried. The defrost timer was first, but that did not fix it. To do this I had to remove the ice maker and the back plate of the freezer. Then I defrosted the coil and cut the wires. stripped them back and installed the new thermostat. re-assembled and tested. has been working great ever since. read more

Refrigerator would not run but interior light was on.

  • Customer: Bruce from Alton, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 149 of 196 people found this instruction helpful
I unplugged the refrigerator, then opened the door and removed four screws holding the plastic electrical panel to the interior top of the main refrigerator compartment and noticed the cold control was corroded badly, apparently from moisture in the panel. I ordered a new one from partselect.com. When it arrived the next day, I then pulled off the control ... read more

bottom of fridg. would not get cool. Temp was 50-60degrees. The freezer compartment worked so I knew it was not the compressor.

  • Customer: Larry from Carthage, NC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 121 of 140 people found this instruction helpful
I removed the fan housing in the freezer section by removing all the screws. (7) There are two screws behind the vents. I did not have an ice maker to contend with so this was very easy. There is only two wires to disconnect....the ground wire and the electricity supply. Then you remove the unit from the back of the housing cover by removing two screws. Th... read more