Models > BLLR113ET0WB > Parts

BLLR113ET0WB General Electric Dryer - Parts

All parts for the General Electric Dryer BLLR113ET0WB

Below is a list of all parts for the General Electric Dryer BLLR113ET0WB - Electric . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the BLLR113ET0WB
1-14 of 101
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.05

D-Shaped Knob Insert Clip

Sold individually.

$48.46

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as possible with as little noise as possible.

$9.14

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

$10.11

Door Handle - White

This part is on the outer door of the dryer.

$16.50

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$35.66

Rotary Start Switch

This part is used to start the dryer once you have selected a setting on the timer.

$3.00

LATCH DOOR

This part helps to keep the door closed while the machine is running.

$5.73

Drum Slide

This slideis sold individually. Some dryers require up to three of these slides . Be sure to check to make sure you order the necessary amount for your dryer.

$3.00

Door Strike

$42.98

Lint Filter with Frame

This part may differ in appearance, but functions same as original.

$4.05

Adjustable Leveling Screw

$4.52

Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

$15.98

High Limit Thermostat

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device,...

$29.14

Door Switch

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

All Parts for the BLLR113ET0WB
1-14 of 101