Models > BFE53 > Instructions

BFE53 Haier Freezer - Instructions

All installation instructions for BFE53 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the freezer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the BFE53
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

green lite out

  • Customer: Matthew from Beltsville MD
  • Difficulty: Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
had to take side cover off, then 2 screws on cover holding t.stat and orange and green lite in place. Replaced lite but couldn't get one of the screws back on in such a tight place and doing it blindly. Had to fix adheasive instead of one of the screws.

Themostat would not cycle

  • Customer: Russell Wyman from Carriere MS
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Put unit up on a work bench removed compressor access door with a philips screw driver then removed two screws holding thermostat in unit. Then removed knob from thermostat removed the wire connections , used a nut driver to remove nut from around control adjustment stem. Then removed sensor line from its tube..Reversed the fore mentioned process pluged that puppy in and we had popcicles again. The whole thing took about a half hour.
All Instructions for the BFE53
1-2 of 2