Models > BEV7110

BEV7110 Hardwick Wall Oven - Overview

Get Parts and Repair Help for BEV7110

If you know the wall oven repair part you need, you can browse the list of all parts on the BEV7110, or you can search by name or part description. You can also find your part by where it is located on the BEV7110 by selecting a section below. We’ve also included any installation videos we have for BEV7110 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the BEV7110 [Viewing 3 of 3]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


2 Piece Broiler Pan

The top of this part is now black.


Oven Door Seal

This oven door seal prevents heat from escaping the oven cavity when in use.


Indicator Light Kit

This indicator light kit comes with two red jewel light lenses.


Light Switch

This light switch is located in the door of the oven.


Interior Window Assembly

This part includes 2 panes of glass enclosed in a metal frame. It's the innermost window for your oven door.

Retainer Clip





Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 25 of 39 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Outer glass in the oven door window shattered

  • Customer: David from Durham NC
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
1.remove the trim around the door (8 screws)
2.remove over glass panel (part with the handle)
Caution; the springs on the door are exactly set for the weight of the door. When we removed the outer glass panel, I almost killed my wife when the door slammed shut.
3.Remove inner metal cover (6-8 screws).some of these screws were baked pretty ti... read more

my oven door seal was frayed

  • Customer: Richard from Arlington TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 12 of 18 people found this instruction helpful
I dissasembled the entire door..lots of screws and watch you dont drop the glass pieces...also keep them in order so you dont get confused on what goes where. I cleaned everything nicely and installed the new seal and everything went together perfectly and looks and works like new. I recieved my part by mail very quickly and the price was MUCH better than ... read more