Quick Question!

Have you ever purchased from PartSelect.com before?

Models > BEP410WB1

BEP410WB1 Roper Range - Overview

Get Parts and Repair Help for BEP410WB1

If you know the range repair part you need, you can browse the list of all parts on the BEP410WB1, or you can search by name or part description. You can also find your part by where it is located on the BEP410WB1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for BEP410WB1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the BEP410WB1

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$34.78

Bake Element - 240V 2100W

This bake element is a partially open tapered style with push on wire terminals.

$5.15

Cover Screw

Sold individually.

$8.39

Touch-Up Paint - White

18ml

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$52.61

Broil Element - 240V

This broil element is found on the roof of the oven and has push-on terminals.

$10.64

Spray Paint - 12 oz. - White

$2.80

Support Roller Clip

Sold Individually.

$25.32

Insulation

Oven Wrap Insulation.

$4.54

Thermostat Bulb Clip

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baking element in oven exploded

  • Customer: Chad from Bloomington, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 36 of 38 people found this instruction helpful
Removed the broken element by taking out the two screws in the back wall of the oven and unplugging the wires. Then did reverse to install the new element. Very simple repair job. read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 20 of 29 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Bottom heating element had burned out.

  • Customer: Randy from Flagstaff, AZ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 15 of 15 people found this instruction helpful
turned off the breaker (240 volts and it was outside, so it took longer than 15 minutes). Removed two screws in the back of the oven, one on each side of the old element, and pulled the old element forward. The wires on the back add some resistance, but they are long enough to pull forward a short distance (3 inches) without damage. Unplugged the old elemen... read more