Quick Question!

Have you ever purchased from PartSelect.com before?

Models > BCRG800 > Parts

BCRG800 Maytag Cooktop - Parts

All parts for the Maytag Cooktop BCRG800

Below is a list of all parts for the Maytag Cooktop BCRG800 - Freestanding, Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the BCRG800
1-14 of 171
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$32.25

Flat Style Oven Igniter Kit

The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both bake and broil elements, and it can replace both short and long igniters. However, it cannot replace round style oven igniters. If your igniter glows for 90 seconds or more without igniting the burner, this means it is too weak to open the valve. The element in your igniter may have shorted it and it might not glow at all, or it might only glow orange or red. It needs to glow white hot; if it cannot get hot enough the gas will not be released from the safety valve and it will be impossible to light the burner in your oven. This kit includes the igniter, ceramic wire nuts, an insulation pad, a metal bracket, a variety of plug ends, and an instruction sheet. The body length is 3 3/4 inches, and the element inside is approximately 1 1/2 inches. This replacement part has an amperage range of 3.3 to 3.6. The element inside this igniter is extremely fragile, do not touch it. Before you start repairing your oven or range, make sure you have unplugged it and shut off the gas supply.

$6.18

Screw, 10-16 x 1

This screw is sold individually.

$7.49

Oven Door Spring

The oven door springs create tension which allows the door to open and close with ease. This spring can be used on either the left or right side of your oven, is made completely of metal, and is approximately 6 inches long. If your oven door will not open or close easily, you may need to replace this part. It may be a good idea to replace both hinges at the same time, because if a spring has become loose, the other hinge is likely to have the same issue. You may need to remove the side panel of the oven to reach where the spring attaches, so make sure the oven is off and is cool to the touch. This part is sold individually.

$3.02

Screw

This screw is sold individually.

$3.00

Frame Screw

Sold Individually.

$46.95

Light Blub - Fluorescent - 18 Watt

This light bulb is used in a range's control panel.

$5.33

NUT- SNAP

This is an OEM part sourced directly from the manufacturer. This snap nut is round, and is made of black plastic. It is approximately half an inch in diameter. This snap nut should snap into place, rather than being screwed in. This product is designed for use in the door of your range/stove/oven. Many of our customers have rated this repair as easy. This part is sold individually.

$40.09

Inner Door Glass

This inner door glass is a little over sixteen inches long, and it is nine and a half inches wide.

$57.76

Oven Door Gasket

$34.81

Burner Spark Ignition Switch

$27.12

Oven Door Stop

$14.36

Push-Button Clock Knob

$5.96

Thermostat Clip

This thermostat clip, used in ranges and ovens, secures the thermostat bulb. Without this clip, the bulb is left without support and this keeps the thermostat from functioning properly. *Please note: this part is sold individually. If your clip is broken or damaged, replacing it could solve your problem. Please refer to the manual provided by the manufacturer for further installation instructions and accurate guidance. As a safety precaution, make sure to unplug your range from the power source.

All Parts for the BCRG800
1-14 of 171