Models > BA5910

BA5910 Maytag Washer - Overview

Get Parts and Repair Help for BA5910

If you know the washer repair part you need, you can browse the list of all parts on the BA5910, or you can search by name or part description. You can also find your part by where it is located on the BA5910 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for BA5910 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the BA5910 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Agitator with Lock Screw


Silicone Adhesive

This adhesive is made specifically to attach dishwasher tine tips and door gaskets (when necessary).


Lock Washer for Stop Lug


Rubber Seal


Agitator Shaft Spring



Sold individually.


Orbital Transmission Kit - Deep Tub

With this kit the mounting stem and seal is included.


Drive Shaft Kit

This kit includes the agitator drive shaft and tub seal kit. Used for 2-belt washers.


Transmission Drive Pulley


Gear Pinion

Common Symptoms of the BA5910 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Floor floded when washer started.

  • Customer: Keith from Big Sur CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 8 people found this instruction helpful
Thirty year old Maytag washer. Remove two screws at bottom of front panel with Philips screw driver. Hinge panel up to disconnect front panel from top of machine. Tilt washer back against wall to gain access to pulley at underside of washer. Then remove Philips head screw from bottom of center shaft. Remove bevel washer with screw. Remove stop block from end... read more