Models > B30LSPSC0

B30LSPSC0 Frigidaire Freezer - Overview

Get Parts and Repair Help for B30LSPSC0

If you know the freezer repair part you need, you can browse the list of all parts on the B30LSPSC0, or you can search by name or part description. You can also find your part by where it is located on the B30LSPSC0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for B30LSPSC0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the B30LSPSC0 [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.00

Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$24.55

Evaporator Fan Blade

$5.41

Hexagonal Screw

Sold individually.

$4.71

Shelf Support

Sold individually.

$5.30

Touch Up Paint - White

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

$4.59

SCREW

Sold Individually.

$6.93

SWITCH

$122.01

Door Gasket - Gray

$155.64

Fan Motor Kit

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circ...

$94.98

Condensation Drain Trough

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

just quit working

  • Customer: Denise from Lowell MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 15 people found this instruction helpful
Bought a new
capacitor. read more

Refrigerator was not cooling

  • Customer: Vicki from Johnson City TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 14 people found this instruction helpful
This was a simple job. Raised the flap in the back that houses the compressor, removed the wire that holds the relay, pulled out the old relay and pushed the new one on. Replaced wire holder and that was it. Plugged it frig and freezer is at zero and lower compartment at 35. As easy as brushing your teeth! read more

Freezer too warm

  • Customer: Kelly from Gladstone OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 22 people found this instruction helpful
Removed two screws and wire harness from old motor. Put in new motor and connected wire harness. read more