Models > AT19N8M > Parts

AT19N8M Admiral Refrigerator - Parts

All parts for the Admiral Refrigerator AT19N8M

Below is a list of all parts for the Admiral Refrigerator AT19N8M - Top Freezer. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AT19N8M
15-28 of 237
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.


Ice Bucket

Holds the ice when it's released by the icemaker.


Door Shelf Retainer Bar - Cut-to-Fit

This part may need to be cut-to-fit if it's too long for your appliance.


Ice Stripper

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.



This fourteen cube ice cube tray is eleven inches long. It is all white in color and is made entirely of plastic.


Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.


Relay and Overload

Also knows as a start device combinaton relay and overload.


Defrost Heater

This radiant glass defrost heater comes with an instructions sheet, and is intended for use with the freezer evaporator of some refrigerators.


Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".


Temperature Control Knob

Sold individually.


Defrost Thermostat - With Wire and Clip

This refrigerator defrost thermostat will cut out at 80 degrees Fahrenheit and kick back when the temperature drops to 15 degrees Fahrenheit.


Icemaker Fill Tube

This fill tube grommet is used to supply water to the icemaker and is partially located in the refrigerator/freezer wall.



Sold individually.


Fresh Food Door Gasket

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

All Parts for the AT19N8M
15-28 of 237