Below is a list of all parts for the Admiral Refrigerator AT19N8M - Top Freezer. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air ...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
This screw is sold individually.
This light switch is triggered by the door opening and closing.
The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold.
***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.
This metallic screw is less than an inch long and comes with a plastic washer.
This defrost timer will cycle for twenty-one minutes after every ten hours of run time.
The defrost timer acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.