Models > AT17EM6A > Parts

AT17EM6A (DA32A) Admiral Refrigerator - Parts

All parts for the Admiral Refrigerator AT17EM6A

Below is a list of all parts for the Admiral Refrigerator AT17EM6A. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AT17EM6A
1-14 of 223
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Replacement Ice Maker

NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.


Light Bulb - 40W

Sold individually.


Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air ...



This screw is sold individually.


Light Rocker Switch

This light switch is triggered by the door opening and closing.


Water Fill Cup and Bearing



Sold individually.


Single Outlet Water Valve Kit

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.



Sold individually.


Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.


Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.


Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.


Ice Stripper

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.



This fourteen cube ice cube tray is eleven inches long. It is all white in color and is made entirely of plastic.

All Parts for the AT17EM6A
1-14 of 223