Models > ASD2123DRW > Parts

ASD2123DRW Admiral Refrigerator - Parts

All parts for the Admiral Refrigerator ASD2123DRW

Below is a list of all parts for the Admiral Refrigerator ASD2123DRW - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ASD2123DRW
15-28 of 257
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$55.60

Defrost Timer - 120V 60Hz

This defrost timer will cycle for twenty-one minutes after every ten hours of run time. The defrost timer acts like a clock. It continually advances and alternates between activa...

$25.00

Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

$4.54

Natural Door Closer

$31.02

Push-On Start Relay

The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.

$28.84

BLADE-FAN

The fan blade is used to blow air over the condenser.

$2.70

SCREW

Sold individually.

$4.70

Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.

$11.07

Water Tube Connector/Union - 5/16 to 5/16

Sold Individually. - * Part may differ in appearance, but functions same as original.

$6.21

Ice Chute Door Return Spring

Sold Individually.

$59.29

Evaporator Fan Motor - 115V 60Hz - Blade NOT Included

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils.

$7.96

Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.

$18.11

Ice Bin Drive Ring

This part connects the ice auger to the motor through the bin.

$42.86

Defrost Heater and Thermostat Assembly

This part assembly has 2 functions: The defrost heater keeps the cooling coils from freezing and the thermostat can tell that the heat next to the cooling coils has reached the de...

$16.41

Ice Stripper

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

All Parts for the ASD2123DRW
15-28 of 257